UV-DESIGN students UV-Integrator14 standard UV energy meter is a high quality UV energy meter.
UV energy meter is used to measure the exposure of an instrument device of UV energy meter sensor in the back of the meter, the measuring range of 250 to 410 nm, the measurement can be directly displayed a positive screen UV energy meter read (unit: mJ / square cm), the power of the UV energy of 3.6-volt lithium battery, the battery due to the use of a special energy saving circuit, the battery lasts about 10,000 hours.
Model: UV-Integrator14
Size: diameter 140 mm high 13 mm
Power: Lithium battery 3.6V
Weight: about 450g
Power consumption: about 10,000 hours (Lithiwn lithium battery)
Applicable equipment: UV UV dryers, exposure and other related industries;
Measuring range :0-5000mW / cm2
Energy show :0-999999mj / cm2 LCD
Measuring range :250-410nm (spectral wavelength)
Operating Temperature: 0 to 70 ℃ (the temperature of the plant in less than 70 ℃, 110 ℃ on a conveyor belt temperature not more than 10 seconds)
Note:
UV energy meter is used to purify space UV drying equipment and other equipment of UV energy,
Do not look directly at or look directly through the refraction / reflection UV lamp,
To ensure that any parts of the body from UV light direct.
UV drying device where the factory dust, clean the adequacy.
Installation / operation:
a. Open the ON switch, the LCD (display) is displayed as zero.
b. Joule meter placed in the vicinity of the exposure lamp light source, its on the back as far as possible at the light source (joules of energy receptors in the back), the exposure time for an appropriate extension of.
c. Measurements until joulemeter display, for example, 1,000 (1000mj/cm2) |
